kit bomba solar PS 4000 C

Characteristics

• flow rate up to 70 m3/h

• lift up to 170 m

• maintenance-free

• excellent efficiency thanks to modern brushless DC motor technology

Application

• drinking water supply

• livestock watering

• pond management

• irrigation

• etc.

Pump Head

Lift

Flow Rate

[m]

[m3/h]

C-SJ3-32

130-170

3.3-3.8

C-SJ5-25

70-130

4.3-6.6

C-SJ8-15

30-80

6.9-12

C-SJ17-4

15-50

14-25

C-SJ30-2

12-22

33-44

C-SJ42-1

up to 12

44-70

Controller PS4000

• controlling of the pump system and monitoring of the operating states

• mounted at surface (no electronic parts submerged)

• two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.

• automatic reset 20 minutes after well probe turns pump off

• protected against reverse polarity, overload and high temperature

• speed control, max. pump speed adjustable to reduce flow rate to c. 30%

• solar operation: integrated MPPT (Maximum Power Point Tracking), Voc = 375 VDC, Vmp > 230 VDC

• battery operation: low voltage disconnect and restart after battery has recovered

• max. efficiency 92% (motor + controller)

• enclosure: IP 54 (sealed, weatherproof)

• ambient temperature: -30 to +40°C/-20 to +115°F

Motor ECDRIVE 4000C

• 2-pole, synchronous brushless DC motor

• high life expectancy, electronically commutated, sensorless

• output voltage: max. 240 VEC (electronically commutated)

• power: 3.5 kW/4.6 HP, nmax = 3,300 RPM

• no electronics inside motor

• water filled

• IP68, pressure balanced, unlimited submersion

• water lubricated dynamic slide bearings, material: carbon/ceramic

• raw earth magnets, sealed in stainless steel and encapsulated in synthetic resin

• unlimited number of starts/stopps per hour

• wetted material: stainless steel (AISI 316), POM, rubber, cable drinking water approved

• max. water temperature: 40°C/105°F

Pump End (PE)

• centrifugal mulistage direct-coupled pump end

• non-return valve

• material: stainless steel (AISI 304), rubber

• dry running protection (optional)

• max. sand content: 50 g/m3, a higher content will wear the pump and reduce its life span considerably

• max. salt content: 300-500 ppm at max. 30°C/85°F, higher salt contents require lower water temperatures

• pH value: 6-9

• high life expectancy